Blog

MagAO-X 2019B Day 11: Packing Up

Yesterday, after our last night on-sky, we began moving the instrument off of the telescope to get it ready to ship back home to Tucson. This also meant that we had to shift back to a day schedule, so Laird and I woke up from a short nap to begin the move at 8:00 am while Jared, Joseph, and Kyle went to bed. The days get a bit mixed up when switching between night and day schedules, so today’s blog post will include events from yesterday and today.

We began building the cart around MagAO-X on the Nasmyth platform on the morning of day 10.

Building the cart around MagAO-X

We lifted the cart up to the instrument using the crane and bolted it to the instrument. Then, we lifted up the instrument off of its legs and rolled the legs away.

The mechanics carefully balancing the instrument.
Mechanics and Laird rolling the legs onto the elevator.
The legs were placed on dollies.
The legs were rolled into the Auxiliary building.

Then, we rolled the instrument into the Auxiliary building.

MagAO-X at the bottom of the elevator.
MagAO-X in the Aux building.

To ensure that MagAO-X is installed on the telescope exactly the same way in May 2020, we had the mechanics match-drill four of the table leg plates to the Nasmyth platform. This will help us find the exact alignment position of MagAO-X in the future, to make the alignment process faster and easier.

Laird and I wrapped up the instrument in saran-wrap and emergency blankets for the move from the telescope to the clean room (the emergency blankets are to protect the instrument from excessive heat exposure from the sun).

MagAO-X looking like it’s ready to go to space even though it’s just going down the road.

After waiting for several hours for the Isuzu truck, we finally moved everything to the clean room.

MagAO-X on the Isuzu.
The table legs on the Isuzu.
The electronics rack on the pickup truck (and the three stooges Laird, Jared, and Joseph).

Finally, Laird and I crashed for the night and our first attempt to stay on a day schedule was somewhat successful.

Today, we woke up early for breakfast and said farewell to Kyle, Joseph, and Olivier as they left on the 8:00 am shuttle.

Kyle, Joseph, and Olivier leaving on the shuttle.

Then Jared, Laird and I headed up to the clean room to pack up the optics and make sure that everything was ready for shipping. When the mechanics arrived, we packed up MagAO-X!

The MagAO-X box opened.
MagAO-X getting ready to be crane-lifted.
Laird heroically balancing the instrument as it’s lifted.
Laird mounting the MagAO-X braces to help reduce impact forces from shipping.
The instrument was bolted to the shipping frame, and the cart was removed.
MagAO-X ready for shipping!

And after the 3 total weeks I’ve spent at Las Campanas Observatory hearing about “Gary the Guanaco,” I finally got to witness the true majesty of this creature up close and personal today. Gary gave me just enough time to take all the pictures I wanted, even posing for me while I was at it.

Gary the Guanaco majestically looking out into the distance.

There is but one day left for the MagAO-X team until we finally head home for the holidays. All we have to do is pack up the electronics rack and do some final organizing, so things are looking good!

Today’s song of the day will be Chris Hadfield’s “Space Oddity,” the first music video ever recorded in space. If you haven’t seen it yet, you should check it out!

MagAO-X 2019B Day 10: The Blog Must Go On

Last night was our fourth on-sky night. It also ran right in to our instrument removal/moving day. So, we went from taking a nice long dataset of beta Pictoris directly into taking off cables and connectors for our electronics. I’m still awake, despite feeling like someone dropped a truck on me, so I might as well ensure the blog gets done. Our dozens of readers are no doubt itching to hear about MagAO-X’s performance on its final on-sky night of 2019B.

I’m happy to report things went pretty smoothly! We observed Trapezium, a set of bright and well studied stars that will give us our astrometric solution (by knowing where they are, we can figure out how far apart and what orientation other stuff is). We observed beta Pictoris for a few hours on either side of transit, obtaining a vAPP + ADI dataset. We started off by optimizing our image quality and took Strehl measurements in a few different filters, resulting in some exceptionally sharp z’ band images of HD 9053:

Photo by Laird Close

Kyle worked on focal plane wavefront sensing, following the work of XWCL alumna Dr. Kelsey Miller (now at Leiden Observatory). The basic idea is using a little bit of the star light at the focal plane of your science camera to provide information on the real, honest-to-god wavefront error as experienced by the starlight at all optics downstream of the main wavefront sensor and correcting deformable mirror. In other words, yet another way of pushing light back where it belongs to make the sharpest possible images.

In unadaptive optics news, we captured Sirius A and B on our acquisition camera. Just for fun. Here they are:

Laird and Alex worked the first half of the night, but went to bed earlier so they could supervise the crane maneuvers to remove the MagAO-X optical table and legs. The PFS instrument is taking our place on the Nasmyth platform after lunch, so we need to get everything squared away before then. For my sake, and the sake of the instrument, I’m glad it’s in the hands of people who have had some sleep.

Jared, Olivier, Kyle, and I decabled the electronics rack and the AO Operator Computer, and got them safely stowed away until this afternoon when we’ll get them ready for shipment and/or storage. We rode down the hydraulic lift with our computers and rack of electronics. Someone made a comparison to going down with a ship.

Fortunately, we are led by a submariner, so we’ll resurface in May.

After which, we all agreed it was time to collapse into bed.

Except for Dr. Olivier Guyon, who had to call into a meeting.

I should be sleeping right now, but according to your MagAO-X song of the day there ain’t no rest for the wicked…

“Ain’t no rest for the wicked” by Cage the Elephant

MagAO-X 2019B Day 9: Third Light

“Can we stop calling it Nth light?”

Dr. Jared Robert Males

Tonight marked MagAO-X’s return to doing AO on starlight rather than an internal calibration source. The Observatory kindly allowed us to remain in place on the platform, so our return to operations was as simple as turning off the lamp and closing the loop on the first bright star we tried.

I’m lying to you, of course. The calibration that had worked so well on night #2 didn’t look nearly as nice when we booted up the system this evening. Alex and Laird had to open up the instrument to make fine adjustments to our pupil image positions. New response matrices had to be taken as well. “But I didn’t change any of this code!” was uttered many times, by many people.

Then we closed loop on a bright star. And it went great. We imaged π Pup and its companion. We even were able to hold on to an Airy ring around the companion! All this, in 1 arcsecond and above seeing (a far cry from Las Campanas Observatory’s trademark 0.5″).

We took the opportunity to record the AO instrument builder’s favorite video: the “now you see it, now you don’t” video.

Note the little point source at 4- and 8-o’clock on the science camera displays at lower right on the screen. Pay no attention to the vizzy behind the curtain. (Video credit: Professor Laird M. Close.)

Of course, capturing this video involved some pretty advanced optics:

Kyle and I drove the twin MagAO-X science cameras tonight. We took some data on pi Pup in various filters for Strehl ratio measurement, measuring the foci in various filters with Maggie’s focus script.

π Pup and companion (near the edge of the image), z’ band, fresh off the autofocus script

We put in our narrowband and continuum methane filters, which will eventually allow us to perform simultaneous differential imaging of exoplanets and detect methane absorption—something we see in planets closer to home, namely Jupiter. For this, however, they were just the narrowband filter available in the instrument best suited to the below-average seeing. (Shorter wavelengths are harder to correct, and our H-α filter would not have looked too good in the conditions we had.)

Next we looked at a close (0.144″) binary, HIP 38160. This wasn’t intended to be a challenging target in terms of contrast, but we were heartened to see it in the dark hole formed by our vAPP.

Image through the vAPP coronagraph, as powerful as it is mysterious. This image has two stars imaged 21 times each, for a total of 42 PSF-ish things.

We also took an on-sky response matrix. This calibration step provides a mapping between our system’s deformable mirror commands and the resulting signal on our wavefront sensor.

We got some good data tonight, learned a bit more about how the system behaves, and have big plans for tomorrow night. (Of course, we also need to move off the platform immediately following that night, and off the mountain shortly after that. Fortunately for Dr. Males and the limits of good taste in blog titles, we’re not getting past “fourth light” this run.)

Today’s MagAO-X Song of the Day:

“Koop Island Blues” by Koop

MagAO-X 2019B Day 8: The Intermission Continues

We’re on the third and final night of the intermission between the MagAO-X on-sky nights. Tomorrow (which is now today), we’ll spin the tertiary around to feed starlight down the waiting maw of MagAO-X for the third time.

In the meantime, we’ve continued to work out bugs, close and refine the loop on our internal source, and argue about future improvements to be made on the instrument. This mostly just looks like fatigued astronomers and grad students frowning at their laptops, which has been covered in some detail in the last two blog posts. Instead, I present a modest selection of images taken around LCO in the last 24 hours:

The sky beginning to lighten behind the Clay and Baade this morning.
Alex captured this stunning photo of a burro silhouetted by the setting sun
Joseph and I went on a successful hunt for wild viscachas behind the Magellan telescopes. We felt a little bad about scaring this guy away, but the sight of his (surprisingly graceful) bounds was worth it. (credit: Joseph)
Zorrito has become a regular outside the dining hall at meal times. (credit: Joseph)

We managed to pull ourselves out of bed before dinner to run (well, drive) up to the Clay for a quick group photo in front of the instrument.

Today’s song is “Hang on Little Tomato” by Pink Martini.

MagAO-X 2019B Day 7: The Eyepiece

Today, we present the eyepiece of MagAO-X!! Back in the day, astronomy was only ever done with an eyepiece. But now, we have far better technology than our own eyeballs to do science. If Galileo or Edwin Hubble were looking down at us, they would probably be jealous.

Hubble looking through the eyepiece of the 100-inch telescope at Mount Wilson Observatory in 1922

Nowadays, telescopes rarely have eyepieces, because the instruments use science cameras to take data instead. But if an instrument does have an eyepiece, it is probably just for fun, so we can feel like Hubble looking through a telescope with our own eyes. That is pretty much why we have an eyepiece for MagAO-X! So that we can see the power of extreme adaptive optics with our own eyes…it’s pretty cool!

The MagAO-X eyepiece was generously donated by the Close family, and it is a work of art. It has a shiny plaque that mimics the traditional tailpiece of a classic telescope.

Laird standing next to his beautiful donation.
Tailpiece of an 1882 6-inch Clark Telescope, very similar to the Steward Observatory 1888 5-inch Clark telescope.

Today, Laird, Maggie, and I tweaked the alignment of the eyepiece optics to make sure it is ready for our next nights on-sky (December 7 and 8). We are planning on using it to see the power of MagAO-X with our own eyes! I took a picture with my smart phone through the eyepiece with our internal light source on. The rainbows you see in the image are due to our 2,000 actuator deformable mirror. There are so many actuators over a small distance that the mirror acts like a diffraction grating!

A smart phone image taken through the eyepiece.
Eyepiece cover.

Jared and Joseph did some work on the electronics rack today. Now we have one additional GPU in the RTC specifically for predictive control calculations.

For the rest of the night, Jared and Olivier continued working on closed loop calibrations and predictive control while Laird, Maggie, Kyle, Joseph and I worked on other MagAO-X stuff.

Jared and Olivier working on AO stuff.
Olivier and his gourmet triple-decker cheese sandwich.
Us working in the break room.
Dr. Close’s “office.”

It is officially Christmas in Chile! They put up a Christmas tree in the lodge.

Christmas tree in the lodge.

Also someone has been feeding one of the zorros, so we have a friendly fox that hangs out by the lodge now. I managed to capture a picture of him hanging out.

The friendly fox.
View of the South from the lodge. GMT site is on the high peak to the right!

And of course, a picture of the sunset for the beginning of our “day.”

Another beautiful sunset at Las Campanas.
The beginning of our day.